iPhone 5 Logic Board Replacement

Translating step 30

English

German

Step 30

Remove the following screws securing the logic board to the rear case:
Two 2.3 mm Phillips screws
Two 2.7 mm standoff screws.
These screws have a Phillips bit pattern, but we found the best removal tool to be a 2.5 mm flathead driver.
One non-magnetic 2.7 mm standoff screw
Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass.
Reassembly hint: when putting the standoffs back in, use the tip of a spudger like a screwdriver to get them started.