Unscrew the single captive Phillips #000 screw securing the home button cable.
The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.
« Previous
Next »
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.
Open help
